By John Hayowyk, Jr. on Thursday, 31 October 2019
Category: Home

HALLIGAN MODIFICATION: GAPPING THE FORKS


PURPOSE: Thru-the-Lock Forcible Entry for Doorknob Removal of Residential & Commercial Buildings

PROCEDURE: Slowly grind the fork end to create a 1 ¼” wide by 1 ¼” deep gap between the forks w/ bench grinder (Easiest)

DISCLAIMER: (Get Permission to Modify the Halligan FIRST) / Wear Proper PPE while using a Grinder

TIPS: Wire Brush the sharp edges when complete & lightly oil the fork end of the Halligan

STAY SAFE
Leave Comments